GroundCloud

Route Details Page


The Route Details page in Descartes GroundCloud shows everything about one route on a single screen: the route's progress, its stops, where those stops are on the map and anything on the route that needs your attention. Managers use it to follow a driver through the day, fix stops and step in when a route falls behind.

This article walks through each part of the page, from the toolbar at the top to the Route Violations panel on the map.


Opening the Route Details Page

You can open a route's details from the Routes page or the Overview page. Both open the same Route Details page, see below.


From the Routes Page

  1. Log in to GroundCloud.io.

  2. Go to the Routes tab.

  3. Click the Work Area Name of the route you want to view. For more on this page, see Routes Overview in GroundCloud.


From the Overview Page

  1. Log in to GroundCloud.io.

  2. Go to the Overview tab.

  3. In the routes table, click the route name of the route you want to view. For more on this page, see Overview.


Page Layout

The Route Details page opens on the current day. It has three areas: the toolbar across the top, the route sidebar on the left and the map on the right.


Toolbar

The toolbar across the top of the page controls which route and day you're looking at and gives you the route-level tools.

  • Route selector: Shows the route number and work area. Select another route from the list to switch to it without going back to the Routes page.

  • Date: Shows the route day you're viewing. Select another date to see the route on that day.

  • Stop Filters: Shows or hides stops based on the criteria you choose. The number beside the filter icon is how many filters are applied.

  • View Stops: Opens the route's stops as a list, where you can check off stops and take action on them. See Transferring Stops, Change or Assign Delivery Status or Delete Stops.

  • Edit Route: Opens the route for editing. The arrow beside it opens more route options, including Priotiy Zones.


Route Sidebar

The sidebar on the left summarizes the route and lists its stops. The top of the sidebar shows the route number, the assigned driver's name and the driver's ID.


Stop Type Tabs

The All, Deliveries and Pick-ups tabs set which stops the sidebar works with. Select Deliveries or Pick-ups to see the summary counts for that stop type only, or All to see the whole route.


Route Summary

The summary shows how far the driver has progressed through the route. Each count shows the completed amount out of the total, with the number still left beside it and a progress bar underneath.

  • Stops: Stops worked so far out of the total stops on the route.

  • Packages: Packages handled so far out of the total packages on the route.

  • Time Commits: Time-committed stops worked so far out of the total time-committed stops.

  • Impacts | Exceptions: The number of impacts and exceptions recorded on the route.

Below the counts, a badge shows how many time violations the route has, or No time violations when every time-committed stop is on track. Click the arrow under the badge to expand the summary and see the time violations broken down into stops at risk of being late, stops projected to be late and stops that were late. Click it again to collapse the summary.


Route Actions

Three buttons under the summary act on the whole route.

  • Reoptimize: Recalculates the stop sequence for the stops still left on the route.

  • Push Route: Sends the latest version of the route to the driver's GroundCloud app.

  • Reset Seq.: Returns the route to its original stop sequence.

Note: Reoptimizing or resetting the sequence changes the stop order, so the route's ETAs are recalculated. Pending stops show Updating ETA until the new ETAs arrive. See Stop ETAs.


Stop Cards

Below the route actions, each stop on the route has a card, listed in sequence order. A card shows:

  • Stop marker: The same marker the stop has on the map, with its sequence number. The marker's shape tells you whether the stop is a delivery or a pickup and whether it has a time commitment, as described under Stop Markers below.

  • Address: The stop's street address, with the city, state and postal code underneath.

  • PKG: The number of packages for the stop.

  • SID: The stop's SID number.

  • Status: A pill in the top right of the card. A pending stop shows its ETA, and a time-committed stop also shows its time window. A worked stop shows the time it was completed or attempted, and any code the driver applied.

Stop cards also show the same icons as the map's stop details bubbles when a stop is a business, needs a signature or shares its location with other stops.


Map

The map shows every stop on the route, the driver's last known location and the route paths. Drag to move around the map and scroll to zoom. Click Satellite in the top right to switch to satellite imagery, and drag the person icon in the bottom right onto a street to open Street View.


Stop Markers

Each stop appears on the map as a marker with its sequence number. The marker's shape and fill tell you the stop type, whether it has a time commitment and whether it has been worked.

  • Delivery: A circle.

  • Pickup: A square.

  • Pending stop: A filled marker.

  • Completed stop: A white marker with a colored outline.

  • Time-committed delivery: A triangle, colored by the time the stop is committed for.

  • Time-committed pickup: A square, colored by the time the stop is committed for.


Time-committed stops use these colors:

Color

Time Commitment

Red

By 10:30 AM

Yellow

By 12:00 PM

Teal

By 3:00 PM

Purple

By 5:00 PM

Dark gray

By end of day


When Stop Details Bubbles are turned on, a small black bubble next to a marker adds detail about the stop: B for a business, a pen for a stop that needs a signature and + for a location with multiple stops.

The driver's last known location appears as a circle with the driver's initials.

Tip: The map has its own legend. Click the Map Settings icon in the top right of the map and select the Legend tab to see every marker type.


Stop Details

Click a stop marker to open its details on the map. The popup shows:

  • Address: The stop's street address, city, state and postal code.

  • Recipient: The recipient's name, next to the stop's marker and sequence number.

  • Location status: Whether the stop's map location has been verified.

  • Zone: The priority zone the stop belongs to, when the route has priority zones.

  • PKG and SID: The number of packages and the stop's SID number.

Click Edit in the popup to change the stop's information or move where it's plotted on the map. See Edit Stop Information. Click the X to close the popup.


Map Settings

Click the Map Settings icon (the stacked layers) in the top right of the map to choose what the map shows. The panel has two tabs.

The Controls tab turns map layers on and off:

  • Stop Markers: Shows the stop markers.

  • Stop Details Bubbles: Shows the business, signature and multiple-stop bubbles next to markers.

  • Traveled Route: Shows the path the driver has driven so far.

  • Suggested Route: Shows the planned path through the remaining stops.

  • Priority Zones: Shows the route's priority zones as outlined areas. See Priority Zones.

  • Stop Scan Positions: Shows where the driver's scanner recorded each stop being closed. Turn on Only on Zoom to show scan positions only when you zoom in. See Scanner Data Plotting.

  • Driver Location: Shows the driver's last known location.

The Legend tab explains the stop markers, time-commitment colors and stop details bubbles.


Selecting Stops on the Map

Use Select Stops to pick a group of stops on the map and act on all of them at once, for example to transfer them to another route.

  1. Click Select Stops in the top left of the map. Your cursor changes to a cross.

  2. Click points on the map to outline the area you want, and connect the last point to the first to close the shape. The stops inside the area are selected, and the sidebar shows how many stops you've selected.

  3. Select the action you want from the dropdown in the sidebar and click Apply.

To select stops from a list instead, click View Stops in the toolbar. For the full steps and the actions available, see Transferring Stops, Change or Assign Delivery Status or Delete Stops.

Note: Make route changes, including transferring stops, after the route has been dispatched. See Dispatching Routes.


Route Violations

The Route Violations panel brings together the information that tells you whether a driver needs help: how the driver is performing against time commitments, exceptions recorded on the route, stops with address problems and speeding.

Click the Route Violations icon (the warning triangle) in the top right of the map to open the panel. The number on the icon is the count of violations on the route. Each tab also shows its own count when it has violations. Click the X to close the panel.


Performance

The Performance tab shows how the driver is doing so far today, so you can see a driver falling behind or stopping for a long time and step in.

Time Commitment Performance (so far) shows how many time-committed stops the driver has serviced out of the total, how many of those were on time and how many were late. The line underneath sums up how many stops the driver was late to.

Last Known Activity shows the most recent stop the driver worked: its address, the time and the result, such as Completed. The pill on the right shows how long ago that was. Below it, the driver's previous activities are listed with their times, addresses and results.

The bottom of the tab shows when GroundCloud last received data from each source, the GroundCloud App and the FedEx Scanner. A time shown in red means that source hasn't reported recently.

Tip: A long gap since the last activity, or a source that hasn't reported recently, is a signal to contact the driver and check on progress before time windows are missed.


Exceptions

The Exceptions tab lists the exception and impact codes the driver applied on the route. Each entry shows when the code was applied, the stop it was applied to and the code with its description.


Flagged Stops

The Flagged Stops tab lists stops with possible address or location problems, such as a stop plotted far from the rest of the route or a stop whose address has changed. Review these stops and correct their information where needed. See Edit Stop Information.


Speeding

The Speeding tab lists the speeding events recorded on the route. Each entry shows when the event happened, the speed the vehicle was traveling compared with the speed limit and how long the event lasted.


Back to top